Thanks for visiting our site!
Made Scroll
Checkout Ebay Auctions For The Cheapest Prices
 |
 Ratan Made Scroll Picture L06217  US $5.99
|
 Ratan Made Scroll Picture L06215 US $5.99
|
 Ratan Made Scroll Picture L06209 US $5.99
|
 Ratan Made Scroll Picture L06210 US $5.99
|
 VINTAGE HAND MADE AND HAND DRAWN SCROLL TENGANAN BALI US $160.00
|
 Ratan Made Scroll Picture L06253 US $5.99
|
 Ratan Made Scroll Picture L06256 US $5.99
|
 Ratan Made Scroll Picture L06254 US $5.99
|
 Ratan Made Scroll Picture L06239 US $5.99
|
 Ratan Made Scroll Picture L06221 US $5.99
|
 Ratan Made Scroll Picture L06248 US $5.99
|
 Ratan Made Scroll Picture L06241 US $5.99
|
 Ratan Made Scroll Picture L06255 US $5.99
|
 Ratan Made Scroll Picture L06238 US $5.99
|
 Ratan Made Scroll Picture L06240 US $5.99
|
 Ratan Made Scroll Picture L06214 US $5.99
|
 Ratan Made Scroll Picture L06212 US $5.99
|
 WESTERN OVAL BELT BUCKLE-HAS FLYING EAGLE WITH NICE SCROLL WORK.. MADE IN USA US $20.00
|
| Powered by phpBay Pro |
Here are some more information for Made Scroll:
Many people cut scroll saw projects for selling at craft fairs and shows. Some more intricate fretwork patterns and portraits can take a great many hours of cutting to complete. In order to make more effective use of your time and make your hobby profitable, you can use stack cutting to cut multiples of a pattern at once.
There are several ways you can go about stack cutting I am going to discuss the technique I use most often which entails using double-sided carpet tape. I use this method as much as possible because it's easy to set up and doesn't allow the layers to move at all if done properly.
First I have to talk about selection of tape. There are many different kinds of carpet tape available to choose from and some will work much better than others. You want to avoid any tape that has a foam core because when you try to separate your layers of wood after cutting, the foam will split and you will have great difficulty removing all the adhesive and foam from the wood. I have had great success with fabric core tape in the past however I have had difficulty finding any of late.
I am currently using Scotch Brand Outdoor Carpet tape CT3010 which works great. This is definitely the strongest sticking tape I have used so you only need tiny pieces to hold your wood together. It does however still require a little work to get the adhesive off.
Some points to remember:
- Be sure not to stack together more layers than your saw/blade combination can handle. I generally don't recommend stacking too much more than 1/2" thick with really hard woods because any thicker than that will require you to reduce your feed rate significantly.
- You'll want to use very small pieces in the work area to hold your layers together if you use the recommended tape (~ 1/2" square pieces unless you are working on something really big).
- Keep the tape pieces away from any delicate areas in the pattern to reduce the chances of damaging your work when you separate the layers.
- You can be more generous with the tape in waste areas on the wood however you should have at least two pieces in the work area to prevent your layers from moving when the waste is cut away.
- To separate your layers, carefully slide a small knife in between the layers near where the tape is and gently pry apart by twisting the knife until the tape un-sticks. Repeat this for each piece of tape.
- The remaining tape should come off more or less in one piece leaving a small amount of adhesive residue on your wood. I recommend gently shaving the majority of it off with your knife and, if any still remains on the wood, you can use alcohol or mineral spirits to clean it up.
I believe most if not all scroll sawyers out there will eventually have a use for stack cutting. Sometimes a pattern requires multiples of the same piece, other times you may want to do multiples of a project. Stack cutting will make your life easier and a roll of good carpet tape should find its home in your tool box.
About the Author:
Sheila Bergner-Landry Has been a contributing editor to "Creative Woodworks and Crafts Magazine" for over 13 years and has published many articles on scroll saw and general woodworking tips. For more informative articles visit her website at http://www.sheilalandrydesigns.com/site/437434/page/75038
The Different Varieties of Scroll Saw Blades Used for Intricate Cuts
A scroll saw is used to generally cut intricate cuts. To help the scroll saw perform these types of cuts you will find the need to have a variety of scroll saw blades. These blades which are available from hardware stores are designed for many different purposes. For this reason you should either have a large variety of scroll saw blades or depending on your crafting abilities a few specialized blades.
There are about six different major varieties of scroll saw blades that are available. These blades are generally about five inches long. A brief look at the different scroll saw blades will let you see how these blades are different in nature. The first one we will look at is that of the Skip tooth blade.
The skip tooth blade is named due to the saw teeth being positioned with a gap distance between each tooth. The next type of scroll saw blade to be looked at is the Crown or two way saw teeth. In this blade type the teeth of the blade are facing both upwards and downwards.
This double direction facing teeth on these scroll saw blades allows you to make cuts in the material. You will have the option of cutting in a downward stroke. You could also cut using an upward stroke. This is very handy as there may be times you will need to cut the wood in either direction.
Another of the scroll saw blades is that of the Double Skip tooth. In this the teeth of the blade is fashioned in a manner that is similar to that of Skip Tooth blade. You will find however that the gap is located after two saw teeth have been found. In other words the arrangement of the teeth for this blade is two teeth, a gap and then another set of two teeth.
You can use the Metal cutting scroll saw blades for the purpose any cutting any type of metal. Here the blade is made from hardened metal. Now if you are cutting any other substance such as glass with a scroll saw it is best if you use a Diamond blade. This particular blade has a diamond coated wire blade. This is truly the blade to use when you need to cut through glass.
The final major scroll saw blade that we shall look at is that of the Spiral blade. This blade is formed in an unusual way. This blade is a flat blade that has been twisted so that the teeth of the blade are facing in every direction. This makes using this type of blade perfect for the tasks where you need cutting ability in just about any direction.
You will find all of these saw blade useful. While these are a brief look at the major scroll saw blades you will find that there are many other blades to use. See what the various saw blades are like. You might find a few more useful ones.
About the Author
Muna wa Wanjiru is a Web Administrator and Has Been Researching and Reporting on Saws for Years. For More Information on Scroll Saw Blades, Visit His Site at Scroll Saw Blades
What material is the Torah scroll made of- Displayed in the NY Jewish Heritage museum?
I was unable to determine what material wheather it was cloth or paper that this scroll was made of
Torah scrolls **must** be made from the skins of kosher animals, almost always calfskin, sheepskin or goatskin.
Shirley Sherrod Defended By Diverse Coalition Calling For USDA To Give Her Job Back
***Scroll down for videos, including a complete version of Shirley Sherrod's speech that started the controversy.***
Thanks for visiting!
