Thanks for visiting our site!
Carved Old
Checkout Ebay Auctions For The Cheapest Prices
 |
 CHINESE WOOD CARVED OLD LOVELY NICE STATUE『MONEY DOG』  US $.99
|
 Rare Chinese Statue Blank Seal, Old Stone, Hand-carved( US $.99
|
| Powered by phpBay Pro |
Here are some more information for Carved Old:
Does your house sign or number need restoration. Are the letters and numbers faded and scruffy? Was it a good quality house sign in its heyday? If so consider re-furbishing your hose sign with genuine gold leaf.
Gold leaf has some real advantages over metallic paint which is the alternative. Many of these paints will fade in sunlight, some of them quite quickly, the Unless you can obtain a professional sign writers paint, bright gold paint will change to a colour more like old dull copper.
Any DIY artist out there will enjoy the challenge of uprating an old house sign, it is an ideal small project to try out the art of gilding.
First you will need a few things:
1. A small 1/4 inch paint brush
2. A larger 1 inch soft paint brush for brushing away dust
3. Sharp flat knife, an old dining knife sharpened on a grind stone will do
4. Book of 22ct gold leaf on a transfer back
5. Sharp Scissors
6. Gilders yellow 30 minute size
As house sign project is intended as a small primer try out so spend as little money as possible, make do with what you already have, you can always buy the proper tools if you enjoy this effort.
Gold is sold in books, with usually 25 pages of gold leaf. It is either sold as loose leaf or with transfer backing. Loose leaf is harder to handle and you will waste a lot of gold. So buy a book of transfer gold leaf and a small bottle of gilders size from a proper gilding supplier (find one on the web) you may be surprised at the reasonable cost. Do not bother with the pretend gold leaf from model shops, it does not handle like real gold and may not have the resistance to weathering that genuine gold leaf has.
About the Gilders size: Gilders size is the adhesive for sticking the gold. Size is sold with several time factors, the 30 minutes in this case applies to the time between painting on the size and applying the Gold leaf. Although sold as 30 minute size the actual time to workability will vary with the ambient temperature. The size is ready the moment it is tacky to touch, you have a short window of time to apply the Gold so be patient and do a few letters at a time.
Try a few practice runs to get a bit of experience, see if you can find an old piece of carved wood or stone, perhaps a discarded photo frame or one of those small ornate plastic flower pots, remember you just need to practice handling and setting to gold leaf into awkward shapes.
Handling the Gold: The transfer gold leaf is gold leaf on a paper backing. Do not attempt to handle with your fingers, instead handle with the blade of an old blunt dinner knife. Cut with the sharp scissors into rectangles about 50% larger than each letter or number.
Method:
1: Clean the old sign lettering as thoroughly as possible back to the original material. If the house sign body needs to be painted do it before gilding, keep the letters and the areas for gilding free of paint if you can. Let the painted house sign dry, the gilding should be the final job.
2. Start with just one letter or number of your house sign, you can do more as your confidence grows.
Paint the size onto the surface where you will apply the gold. Try not to over-paint onto the face of the house sign, use a clean cloth to wipe away any excess.
3: Keep an eye on the size, as soon as its touch dry you are ready to apply the gold. press the gold leaf, face down onto the size, rub firmly with your finger or use a smooth tool, the handle of a paintbrush will do, then peel away the backing paper leaving the new gold in place.
There will inevitably be some over-spill but leave it! Wait until the work has dried overnight then clean of with a razor blade or fine wet and dry paper depending on the background finish of the house sign.
I hope you enjoy this attempt at gilding and if it should inspire you to take up gilding as a hobby please let me know!
Steve Walker has been a craftsman in stone and marble for 40 years. Leaving school at fifteen he entered an apprenticeship as an ecclesiastical marble mason with an old London firm, and in his long career have practised as a stone mason, letter cutter, restoration carver, marble mason and carver, fireplace designer and manufacturer. He has worked in old fashioned traditional stone firms and in modern marble workshops, in almost every type of stone marble and granite. He is now a house sign maker, the sole owner, and craftsman of Stone Engravings House Signs – http://www.stoneengravings.co.uk
Pumpkin Carving Designs: Easier Than You Think
Click here to get pumpkin carving utensils to use for Halloween.
Designs, when this word is been spelled out the mouth our imaginations go weird and it varies from person to person. As soon man landed on the earth he found the world to be a new one.
He started to hit the stones so as to kill the time, which later turned out into beautiful carvings. This artistic kind of pattern has turned out his mind carve out what he sees. This has made him more knowledgeable in art. It takes such a pleasure to carve out design.
Carving designs in pumpkin, it surely requires great skill and concentration. Pumpkin carving designs seems to be an easy job. Yes, indeed it is an easy task. With the help of a knife we can carve out triangle, circle and ever geometry we need.
Get Free Gift Card to use for Halloween or just general shopping!
The famous jack o’ lantern can be made out easily. Just take a knife and makes triangles in the place of eyes, nose and month. The carving result is a jack o’ lantern. This lantern holds a historic importance. It is been an age old tradition to lit up the jack o’ lantern on the eve of Halloween.
But to make a really artistic and beautiful jack o’ lantern we need some special tools and skill as well. First and foremost thing before carving is the planning and designing the carvings on a paper.
Then we have to make sure that we are carving on a flat surface. Hence we can easily carve out the designs on pumpkin.
About the Author
Or Kmart use for Halloween or just general shopping!
How can i get brand new pine to match 120 year old walnut wood?
I have three 120 year old walnut carved wood legs and a brand new carved leg made from pine. The pine- though stained twice already with a walnut oil based stain is not near dark enough to match the genuine antique legs that at their darkest points are near black. How can I reach this efect?
What are some SPECIFIC ways to get pine to match antique walnut. I live in a rural area and do not have any specialty stores (so bizarre extremely hard to find items are really not an answer for this question).
Are there alternative products to give that balck appearance? Ist there a homemade stain? Could I use something like black show polish to give the new piece the apperance of old or even thinned down black oil paint used like a stain?
rather than walnut stain use mediteranian or ebony these are both much darker
Ann Filmer's at home in Berwyn
Founder of 16th Street Theater makes new local work her mission Before Buzz Kilman, the erstwhile radio star and harmonica-playing talent, was added to the cast of the play "This Train," Tony Fitzpatrick's self-described "storytelling multimedia kind of thing," in which Fitzpatrick stars, he had a meeting with the show's director.
Thanks for visiting!
